ColléRatiss

SPECIFICATIONS
• Joint tape adhesion and surface skimming.
• Airless, Bazooka and Manual application.
• Ready-to-use paste filler.
• High filling capacity, fills small holes and cracks.
 
ADMITTED SURFACES
On interior surfaces: joints, plasterboard, pre-cast slabs. Surfaces should be dry, clean and sound.
 
ADVANTAGES
• Highly versatile filler - bonding AND skimming.
• Excellent adhesion - Excellent smoothing properties - Long usage time.
• Airless, Bazooka and Manual application.
• Easy to sand.
 
MATERIAL
• Airless pump (nozzles 527 to 531 and 627) pressure 140-150 bars.
• Bazooka
• Trowel
• Coating knife
 
COVERAGE
Filling and levelling: approx. 400 g per linear metre for bonding and 1.5 kg - 2 kg/m² for smoothing/skimming.
 
COVERING
All types of paints and coatings
 
With the Bazooka, fill the cartridge using the pump provided.
With the Airless system, spray horizontally at 20 to 30 cm from the surface. Recommended tips 527 to 531, pressure 140-150 bar.
After an initial vertical spray application along the plasterboard recesses, apply and compress the joint tape on the filler using a coating knife. To avoid air bubbles, do not exert excessive pressure when compressing the tape.
After drying, apply a second coat and carefully smooth down with a finishing trowel.
Smoothing and skimming: spray with a 627 tip then smooth with a coating knife.

Our tips